Fuel Pressure Problem --- Experienced help appreciated
Thread Starter
Pro
Joined: Apr 1999
Posts: 533
Likes: 6
From: Poinciana Florida
Fuel Pressure Problem --- Experienced help appreciated
At one point I was running an intank Bosch pump to an inline Bosch pump with a Kenney Bell boost a pump aiding the inline unit. the inline unit fed seperate fuel lines which dumped into modified fuel rails feeding 83lb injectors.. Fuel pressure with this system provided 48lbs@4000rpm ramping up to52lbs @6000rpm and produced 585rwhp. Obviously I couldn't be happy so I did away with the inline unit, built an intank hanger and added a second Bosch pump each feeding a seperate fuel line. The fuel volume obviously increased and I added a pressure switch to allow only one pump to function for street driving. The second pump kicks in @ 3000rpm. I can't seem to tune this beast with the DFI. Any body been in this situation and willing to give input?
Burning Brakes
Joined: May 1999
Posts: 760
Likes: 1
From: Greenwich, CT
Re: Fuel Pressure Problem --- Experienced help appreciated (RVY)
Do you have seperate regulators & return lines? There is some dual pump tech info here:
http://www.gnttype.org/techarea/fuel...nearticle.html
