Engine Miss
Thread Starter
Heel & Toe
Joined: Jan 2014
Posts: 21
Likes: 0
From: Temple Terrace Florida
Engine Miss
My 94 has an engine miss that I can't seem to pin down.
I have ran a couple data logger sessions and none of them have shown any DTC errors. The O2 sensors under acceleration seem to fluctuate between high and low from bank to bank with no consistency. I was hoping that a low O2 reading would give me which bank the mis-firing cylinder was on. None of the readings ever get into the RED, only the Lterm, Sterm, and Knock count ever gets into the yellow.
I have ran a couple data logger sessions and none of them have shown any DTC errors. The O2 sensors under acceleration seem to fluctuate between high and low from bank to bank with no consistency. I was hoping that a low O2 reading would give me which bank the mis-firing cylinder was on. None of the readings ever get into the RED, only the Lterm, Sterm, and Knock count ever gets into the yellow.
