Heads
Team Owner
Joined: Oct 2004
Posts: 81,241
Likes: 3,062
From: altered state
St. Jude Donor '05
Thier 180 L98 head is plenty for a 350 tpi plus your exhaust manifolds will cover the port, 195s youll need headers
Buy the head thats best for your build NOT not one you think you may grow into down the road...your car will run the way its supposed to.
Buy the head thats best for your build NOT not one you think you may grow into down the road...your car will run the way its supposed to.
Safety Car
Joined: Aug 2009
Posts: 3,745
Likes: 275
From: Melbourne, Victoria, Australia
AFR heads BUT ONLY if you remove the TPI inlet and go to a mini ram so you can rev it and use the higer flowing heads, long tube headers are also a must.
If tyou are keeping the TPI runners and inlet manifold forget about the heads and just get long tube headers.
If tyou are keeping the TPI runners and inlet manifold forget about the heads and just get long tube headers.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
Melting Slicks
Joined: May 2010
Posts: 2,082
Likes: 3
From: Conowingo Maryland
Im running edelbrock heads intake and runners. They do the trick for me, You are going to here as many yeas for as many different combos out there. Like was said before get what matches your build or you will find your self going back words. Get info from people who are in the know. talk to the cam manfactures and teh different head and intake guys to set you in the right direction. Also there are pleanty of build guides on line. Nothing is more importent then matching things up to complement each other
Safety Car
Joined: Nov 2009
Posts: 3,970
Likes: 340
From: Adelaide South Australia
When I was looking for heads I wrote down the flow figures of each at .500 lift, as most people with modified TPI's are running between .500 and .550 lift (at the time I was running a .500 Lunati)
Edelbrock CNC 185 250/199
Trickflow 195 253/177
Brodix 180 243/175
Patriot 190 250/175
AFR 180 260/207
AFR 195 274/207
Now, there is always going to be some give and take when the manufacturer gives you the flow figures, but they are probably in the ballpark,
like Cuisinart said, go with what compliments your combo, I ended up with Edelbrock cnc 185 and they work well with the TPI, but as you can see the AFR's do flow very well, and the AFR 180's would be a good TPI head.
If you want to research more you could look up the flow figures across the whole lift range of the heads that your interested in and compare.
Edelbrock CNC 185 250/199
Trickflow 195 253/177
Brodix 180 243/175
Patriot 190 250/175
AFR 180 260/207
AFR 195 274/207
Now, there is always going to be some give and take when the manufacturer gives you the flow figures, but they are probably in the ballpark,
like Cuisinart said, go with what compliments your combo, I ended up with Edelbrock cnc 185 and they work well with the TPI, but as you can see the AFR's do flow very well, and the AFR 180's would be a good TPI head.
If you want to research more you could look up the flow figures across the whole lift range of the heads that your interested in and compare.
Drifting
Joined: May 2006
Posts: 1,428
Likes: 7
From: Chewelah Wa
I agree....the heads need to match the build. I picked up some slightly used Edelbrock RPM's for 600 bucks. A good fit for a modded 85 350 TPI and the finish quality is amazing compared to other cheap heads. I don't think I would pay full price for them. Still waiting to put them on.
