Intercooler and piping?
Melting Slicks
Joined: Oct 2000
Posts: 2,158
Likes: 9
From: N.E. WA
I can't see pics while I'm at work but try this out. http://forums.corvetteforum.com/g/album/1358826
Should be interesting if nothing else. lcvette has a lot of knowledge and has built some very cool ****. PM him, he's always been fun to talk to.
Should be interesting if nothing else. lcvette has a lot of knowledge and has built some very cool ****. PM him, he's always been fun to talk to.
Melting Slicks
Joined: Jul 2004
Posts: 3,277
Likes: 32
From: Mission Viejo California
Yes, it was done custom. I bought it used after seeing how tiny the pro charger one was. The stock pro charger one was really small core.
I'll take a pic of the tube from the blower area to the inlet of the inter cooler when I get home.
I'll take a pic of the tube from the blower area to the inlet of the inter cooler when I get home.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
Thread Starter
Drifting
Joined: Feb 2013
Posts: 1,465
Likes: 12
Melting Slicks
Joined: Jul 2004
Posts: 3,277
Likes: 32
From: Mission Viejo California
funny, that looks a lot like the intercooler I have for sale. What member's car is that? I don't recall off hand the name of the member that I picked it up off of.
Here's some pics of the discharge tubing. It's setup for a ysi setup. It's aluminum and I'm sure your fab shop could cut it up and change some of the angles to work with your procharger setup. It does have a bypass mount on it.
Here's some pics of the discharge tubing. It's setup for a ysi setup. It's aluminum and I'm sure your fab shop could cut it up and change some of the angles to work with your procharger setup. It does have a bypass mount on it.