700r4 geometry holley carb
Thread Starter
Instructor
Joined: Aug 2014
Posts: 249
Likes: 0
700r4 geometry holley carb
I converted to carb from crossfire on my 84.. Runs great but as for the geometry for the TV cable it's not correct. I'm pressed for time and it will take til Wednesday or Thursday to get the corrector.. Is there a way to make one? I assume I could cut a piece of steel and drill holes but I'd need to know where the holes need to be. And how big the bracket needs to be. Any help is appreciated.
Melting Slicks
Joined: Sep 2008
Posts: 2,376
Likes: 111
From: Cherokee National Forest TN
Know that I have seen the blue prints but cannot locate them at this time.
Found this link maybe it will suffice.
http://purplesagetradingpost.com/sum...o/700R4p1.html
Found this link maybe it will suffice.
http://purplesagetradingpost.com/sum...o/700R4p1.html
Burning Brakes
Joined: Jun 2005
Posts: 1,191
Likes: 15
From: Wallingford Vermont
My .02
Be real careful with the setup and operation of the TV cable on the 700R.
Here's some good intel on the TV cable.
http://www.tvmadeez.com/article/index.php
Be real careful with the setup and operation of the TV cable on the 700R.
Here's some good intel on the TV cable.
http://www.tvmadeez.com/article/index.php
