96 Blower Motor Control Module Pinouts
Thread Starter
Instructor
Joined: Apr 2006
Posts: 109
Likes: 1
From: Biddeford ME
96 Blower Motor Control Module Pinouts
Does anyone have the right pin outs for a 96 Blower Control Module? I have to replace the connectors (4-way and 2-way) and need to know the correct color wires to which pins on the Control Module. RED-Battery, BLK-Ground, TAN-Control, PURPLE-Blower motor. Thanks
Thread Starter
Instructor
Joined: Apr 2006
Posts: 109
Likes: 1
From: Biddeford ME
Here's an image of the connectors
Attachment 47843111 Attachment 47843115
C1 - B = RED
C2 - A = PPL
C2 - B = TAN
C2 - C = BLK
Attachment 47843111 Attachment 47843115
C1 - B = RED
C2 - A = PPL
C2 - B = TAN
C2 - C = BLK
Thread Starter
Instructor
Joined: Apr 2006
Posts: 109
Likes: 1
From: Biddeford ME
Wire connection worked perfectly. However, I cannot find the 4 Way Metri Pack 480 series connector. It has been discontinued by GM. Does Anyone know where I can purchase this connector?
Team Owner
Joined: Sep 2003
Posts: 25,393
Likes: 2,741
See your other thread and I'd try my "new" still available from GM first. A dealer actually might have it on the shelf to confirm the pin out and maybe you could "negotiate" a price.
