easy one guys

Reply Subscribe

Thread Tools

Search this Thread

Aug 10, 2002 | 10:54 PM

flubuyu2

Thread Starter

Instructor

Joined: Jan 2002

Posts: 172

Likes: 0

From: Garland TX

easy one guys

Hey everyone ,
I'm replacing alot of the top end this weekend and ran into a snag.I got her down to bare heads and there is a connecter pipe running along the back of the heads looking to be a coolant passage(1993 )Thanx to Mr. Jeff Kopp for having me order the washers to replace ! anyway my question is this does anybody know the size of these buggers ;I've tried every wrench I have and none fit quite right thought 14 mm but that slipped too !! HELP !! Thanx in advance

Aug 10, 2002 | 11:02 PM

Nathan Plemons

Race Director

Joined: May 2001

Posts: 14,165

Likes: 9

Re: easy one guys (flubuyu2)

Hmm, strange. Give me about 30 seconds and I'll go downstairs and find out for you. :cheers:

Aug 10, 2002 | 11:06 PM

flubuyu2

Thread Starter

Instructor

Joined: Jan 2002

Posts: 172

Likes: 0

From: Garland TX

Re: easy one guys (Nathan Plemons)

thank you

Aug 10, 2002 | 11:08 PM

Nathan Plemons

Race Director

Joined: May 2001

Posts: 14,165

Likes: 9

Re: easy one guys (Nathan Plemons)

Mine is 15 mm, nothing on the fractional side comes even close. Probably won't work for you if the 14 is too big. Sorry.

Aug 10, 2002 | 11:19 PM

flubuyu2

Thread Starter

Instructor

Joined: Jan 2002

Posts: 172

Likes: 0

From: Garland TX

Re: easy one guys (Nathan Plemons)

That may be the wrench I tried ...been a long day.If yours is 15 mm i'll try that one again. :confused:

Aug 10, 2002 | 11:24 PM

Nathan Plemons

Race Director

Joined: May 2001

Posts: 14,165

Likes: 9

Re: easy one guys (flubuyu2)

Worn wrench maybe?

I have two 15mm's One is an older craftsman normal wrench. It's a little loose. The new very rarely used craftsman stubby one is tighter.