96 Dewitt radiator install
Thread Starter
Pro
Joined: Apr 2004
Posts: 685
Likes: 1
From: Austin TX
96 Dewitt radiator install
I have trimmed the pads and still having fitment issues. Getting conflicting information where some people had to trim the fan shroud 3/8 of an inch to get everything to clear and others have not. Is the trimming ZR1 only or have the LT1/4 cars required it as well?
It's getting dark and put the project aside for the night as I cannot see exactly where I am missing and could use an extra set of hands tomorrow to get everything lined up.
Finding a lot of older posts on this and the pics and links are missing from most. Appreciate any help I can get!
It's getting dark and put the project aside for the night as I cannot see exactly where I am missing and could use an extra set of hands tomorrow to get everything lined up.
Finding a lot of older posts on this and the pics and links are missing from most. Appreciate any help I can get!
Thread Starter
Pro
Joined: Apr 2004
Posts: 685
Likes: 1
From: Austin TX
Found this so I'll give the spacers a try tomorrow and hopefully that's the last of my roadblocks.
https://www.corvetteforum.com/forums...tallation.html
https://www.corvetteforum.com/forums...tallation.html
