New heads and cam.. first time programming
Thread Starter
Le Mans Master
Joined: Sep 2001
Posts: 7,928
Likes: 1
From: More cowbell...
St. Jude Donor '04
New heads and cam.. first time programming
Next weekend, I am installing new ported heads, and a more aggressive cam. I have all the goodies for burning, and collecting data. Is it realistic to think I can get the car drivable in an afternoon?? I know that it takes months or even years, to squeak out that last bit of power, but I just want the thing running, so I can get it home from my sisters.
-Mark
-Mark
Thread Starter
Le Mans Master
Joined: Sep 2001
Posts: 7,928
Likes: 1
From: More cowbell...
St. Jude Donor '04
Re: New heads and cam.. first time programming (Vette92)
It is a GM cam, specs are:
222/230 .542/.563 112LSA
I think it might be just a little too hot to run right under stock programming, but then again, I dont know much about the stock programming!! :lol:
-Mark
222/230 .542/.563 112LSA
I think it might be just a little too hot to run right under stock programming, but then again, I dont know much about the stock programming!! :lol:
-Mark
Team Owner
Joined: Apr 2001
Posts: 22,267
Likes: 3
From: Dallas TX
Re: New heads and cam.. first time programming (Vette92)
Depending on the cam, you could probably drive it home on the stock programming.
