Clutch pedal
Thread Starter
Go Fast
Joined: Jan 2002
Posts: 1,695
Likes: 94
From: Colorado Springs CO
Clutch pedal
in July I had my clutch changed. After much research I went with the Spec 2. The problem I'm having is clutch pedal doesnt have enough travel. The clutch was bled. I havent crawled under the car, but my camaro has an adjustable rod to adjust the clutch travel. Does my ZF have an adjustment? Thanks
Pro
Joined: Mar 2000
Posts: 632
Likes: 0
From: Medina, Ohio
Re: Clutch pedal (Bgreenard)
It's Hydraulic so it's self-adjusting, my 86 is suppose to have .700 travel measured at the fork. I don't know if your's is the same or not, check your manual or ask somebody on here. Check where the Master cylinder hooks up to the pedal make sure that's intact, my car has a bushing that goes in the push rod, this wears out and causes you to not get the proper travel.
Good Luck :seeya
Good Luck :seeya
