Do 335's fit? You decide!
Thread Starter
Racer
Joined: Jan 2001
Posts: 453
Likes: 0
From: Veracruz
Do 335's fit? You decide!
Hi All,
Thought I'd post this over here also. This is my car with ZR-1 offset rims and 335's.
http://www.picturetrail.com/vettster
:seeya :seeya :seeya
Thought I'd post this over here also. This is my car with ZR-1 offset rims and 335's.
http://www.picturetrail.com/vettster
:seeya :seeya :seeya
Team Owner
Joined: Mar 2001
Posts: 30,856
Likes: 293
From: Boston, Dallas, Detroit, SoCal, back to Boston MA
Re: Do 335's fit? You decide! (ZAD54)
Melting Slicks
Joined: Apr 2002
Posts: 3,019
Likes: 0
From: down that one road next to that big tree
Re: Do 335's fit? You decide! (RadPolo96)
do you guys ever hit the fender in hard corners? that's the only thing worries me is will it hit the fender and crack the fiberglass??
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Safety Car
Joined: Jul 2001
Posts: 4,178
Likes: 2
From: Windermere FL
Re: Do 335's fit? You decide! (gtsyellow)
Yes they do stick out. Especially with the ZR-1 offsets. They pucker a little as well. You would really want 17x12 rims for those like Brian. Make sure you don't lower it and keep good shocks on it if you want to keep your fenders attached. My 315s stay inside the fenders when I bottom out but those look like they would rip those flanks out.
Melting Slicks
Joined: May 2000
Posts: 2,148
Likes: 1
From: Chandler AZ
Re: Do 335's fit? You decide! (gtsyellow)
do you guys ever hit the fender in hard corners? that's the only thing worries me is will it hit the fender and crack the fiberglass??