March Pulleys Sett-up
Thread Starter
Race Director
Joined: Aug 2002
Posts: 13,356
Likes: 0
From: tucson AZ
St. Jude Donor '04 & '05
March Pulleys Sett-up
So I was running the march pulley set up on my '84...3 pulley system...on an automatic....The charging system went down to 11.5 volts in the red when I ran the radio or even hit the bracks this with a stock altenator....
anyway...called tuff stuff and ordered an 140 amp altenator..after instal still did the same thing....so I changed the altenator pulley to the stock one...and still had the problem....drove me crazy...
Removed all the pulleys and ran the stock components....
Now works great...
But I notice a difference in revs
anyone have any Ideas what I can do to reinstall the march system????
THANKS :smash: :lol:
anyway...called tuff stuff and ordered an 140 amp altenator..after instal still did the same thing....so I changed the altenator pulley to the stock one...and still had the problem....drove me crazy...
Removed all the pulleys and ran the stock components....
Now works great...
But I notice a difference in revs
anyone have any Ideas what I can do to reinstall the march system????
THANKS :smash: :lol:
