I hate my new tires
Safety Car
Joined: Aug 2013
Posts: 4,430
Likes: 609
From: Minneapolis Mn
Might want to look at this info from VD&P:
Find info here: https://www.vbandp.com/instructions/...pecs/file.html
Daily Driver - These specs are designed to minimize tire wear and dynamic forces on front end parts. Driver effort is minimum, the car will steer very "light" and may wander or be "darty" on road with wear ruts. If you are uncomfortable with this feeling, toe the car in up to a maximum of 1/8" total toe in.
Front 84 - 96 Corvette Daily Driver
Toe 1/32" in
Camber 0° neg
Caster 5-7° pos
Rear 84 - 96 Corvette Daily Driver
Toe 1/8" in
Camber 0°
Find info here: https://www.vbandp.com/instructions/...pecs/file.html
Daily Driver - These specs are designed to minimize tire wear and dynamic forces on front end parts. Driver effort is minimum, the car will steer very "light" and may wander or be "darty" on road with wear ruts. If you are uncomfortable with this feeling, toe the car in up to a maximum of 1/8" total toe in.
Front 84 - 96 Corvette Daily Driver
Toe 1/32" in
Camber 0° neg
Caster 5-7° pos
Rear 84 - 96 Corvette Daily Driver
Toe 1/8" in
Camber 0°
