Holley quit making the Stealth Ram ?!
Thread Starter
Drifting
Joined: Apr 2001
Posts: 1,926
Likes: 279
From: Portugal
Holley quit making the Stealth Ram ?!
I just got off the phone with Summit. They say Holley has quit making the Stealthram and there are none left in stock.
Can this be true? They only made them like 7 monhts?
If it's true, I'm hoping it's because they're going to start making the version that was promised that'll fit under a C4 hood.
Can this be true? They only made them like 7 monhts?
If it's true, I'm hoping it's because they're going to start making the version that was promised that'll fit under a C4 hood.
Team Owner
Joined: Sep 2001
Posts: 62,143
Likes: 1,729
From: Athens AL
C7 of the Year - Unmodified Finalist 2021
C4 of Year Finalist (performance mods) 2019
Re: Holley quit making the Stealth Ram ?! (DiabolicalDave)
If they wouldve started out with a model that fit Fbody and Corvette hoods, then they couldve gone somewhere with it.
Thread Starter
Drifting
Joined: Apr 2001
Posts: 1,926
Likes: 279
From: Portugal
Re: Holley quit making the Stealth Ram ?! (DiabolicalDave)
I just got the PNs off the Holley website (7540 for the intake set and 534-185 for the fuel rail kit) and then went to the Summit website and that comes back with prices and does NOT say B/O (backorder). So, now I don't know what to think.
Maybe the phone rep for Summit was new or stupid.
Maybe the phone rep for Summit was new or stupid.
Melting Slicks
Joined: Apr 2002
Posts: 3,019
Likes: 0
From: down that one road next to that big tree
Re: Holley quit making the Stealth Ram ?! (DiabolicalDave)
hopfully they will redesign it as a stealthramII, how hard would it really be to cut down a inch or so, yea you might loose a small amount of torque from a shorter runner. thing is everyone has been wanting a manifold with the MR top end & a more torquey bottom end, the stealthram was that, just never frigin fit !
Le Mans Master
Joined: Oct 2001
Posts: 5,302
Likes: 2
From: Atlanta GA
Re: Holley quit making the Stealth Ram ?! (gtsyellow)
... thing is everyone has been wanting a manifold with the MR top end & a more torquey bottom end, the stealthram was that, just never frigin fit !
Advanced
Joined: Aug 2002
Posts: 52
Likes: 1
From: MA
Re: Holley quit making the Stealth Ram ?! (DiabolicalDave)
Holley has a stealth ram press release dated Oct. 2, 2002, according to it they still make the stealth ram here is the link http://www.holley.com/HiOctn/NewsInf...NR101002W.html
I bought the stealth ram inake and fuel raills from summit last month
I bought the stealth ram inake and fuel raills from summit last month
Safety Car
Joined: May 1999
Posts: 3,651
Likes: 5
From: Atlantis
Cruise-In I Veteran
Re: Holley quit making the Stealth Ram ?! (350camaro)
I'm not cutting a hole in my hood for ANYBODIES intake.
I like the StealthRam but will not chop my Vette up to install it.
Hey Holley. Make it fit the Vettes.
I like the StealthRam but will not chop my Vette up to install it.
Hey Holley. Make it fit the Vettes.
Race Director
Joined: Feb 1999
Posts: 12,772
Likes: 17
From: Indianapolis IN
Re: Holley quit making the Stealth Ram ?! (VetNutJim)
I just called Holley and they are in stock and still making them!
BTW I will be making a custom plenum, just to be different! :D
[Modified by ld85, 11:14 AM 10/18/2002]
BTW I will be making a custom plenum, just to be different! :D
[Modified by ld85, 11:14 AM 10/18/2002]
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Burning Brakes
Joined: Apr 2002
Posts: 1,126
Likes: 0
From: Cleveland OH
Re: Holley quit making the Stealth Ram ?! (VetNutJim)
I'm not cutting a hole in my hood for ANYBODIES intake.
I like the StealthRam but will not chop my Vette up to install it.
Hey Holley. Make it fit the Vettes.
I like the StealthRam but will not chop my Vette up to install it.
Hey Holley. Make it fit the Vettes.
Ron
