Now she sucks! Part 2
Thread Starter
Advanced
Joined: Jul 2018
Posts: 60
Likes: 4
From: Arozona
Anything helps! Thinking of doing something similar to the front licence plate cover but with a heavier screen. I don't need front plates in AZ, but I think ill get a used one since I don't want to cut up my perfect original. Anything to get some air pushed up there.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Melting Slicks
Joined: May 2018
Posts: 2,091
Likes: 600
From: Question Government
Once you remove the front license plate cover, you'll see there's a lot of plastic that can be modified/cut away to allow some more air to enter. I cut away some of this hidden plastic, but kept enough so I could still mount my front license plate cover. The plate cover can also be modified slightly, cutting away a little of the bottom interior plastic without being visible. After modifying it, some air enters around the perimeter of the mounted plate cover, especially the bottom.