Looking for TPiS MiniRam
Thread Starter
Cruising
Joined: Nov 2018
Posts: 11
Likes: 0
Looking for TPiS MiniRam
Quick and simple guys..... Looking for a TPiS miniram setup for a solid price don't wanna Shell out 1200+for a new one when I can potentially get one in a good condition for considerably less. I own an '87. Btw
Team Owner
Joined: Oct 2004
Posts: 81,241
Likes: 3,063
From: altered state
St. Jude Donor '05
A converted LT1 intake is an option too....litle less plenum room but port it well it will outflow any head you find. I typically get 350-370cfm out of them which is overkill.
Look for threads by davif frederick in the parts section or bring one to a machinist, they can weld in your dist boss cheaply.
Look for threads by davif frederick in the parts section or bring one to a machinist, they can weld in your dist boss cheaply.
Last edited by cv67; Dec 19, 2018 at 01:01 PM.
Thread Starter
Cruising
Joined: Nov 2018
Posts: 11
Likes: 0
A converted LT1 intake is an option too....litle less plenum room but port it well it will outflow any head you find. I typically get 350-370cfm out of them which is overkill.
Look for threads by davif frederick in the parts section or bring one to a machinist, they can weld in your dist boss cheaply.
Look for threads by davif frederick in the parts section or bring one to a machinist, they can weld in your dist boss cheaply.
Last edited by TGM.JR; Dec 19, 2018 at 05:59 PM.
Race Director
Joined: Apr 2003
Posts: 17,700
Likes: 1,667
From: moraga ca
The SuperRam hasn't been made in years. Used ones around a grand.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Dec 2000
Posts: 21,094
Likes: 282
From: Phila., PA burbs
Check www.thirdgen.org as well. They pop up there often. 
Last edited by TA; Dec 20, 2018 at 06:04 PM.
Le Mans Master
Joined: Aug 2002
Posts: 7,441
Likes: 421
From: Ventura County, CA
St. Jude Donor '05 thru '24
Its a nice intake but a ported LT1 swap might come along sooner before you spot a deal on a used MiniRam
Tom400CFI will sell ya one and Cuisinartvette (Ron) will port it for ya - Goodluck on the search
Tom400CFI will sell ya one and Cuisinartvette (Ron) will port it for ya - Goodluck on the search
Safety Car
Joined: May 2006
Posts: 4,290
Likes: 140
From: Salem NH
I'd do a complete LT1 swap. A cammed LT1 is a great upgrade over a tired L98, especially one with the '128 casting heads.
LT1's are cheap and plentiful from fbodies. I've got two sitting on stands in my shop waiting for something to put them in.
Pick up an ECM from a '94/95 for $50 which is flashable through the OBD port.
-- Joe
LT1's are cheap and plentiful from fbodies. I've got two sitting on stands in my shop waiting for something to put them in.
Pick up an ECM from a '94/95 for $50 which is flashable through the OBD port.
-- Joe