New dyno numbers.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Melting Slicks
Joined: Mar 2002
Posts: 3,108
Likes: 126
From: S.L.C. UT
Re: New dyno numbers. (91tpi-zf)
Actually, I changed from a 700-701 TPIS cam to a 248/254 Comp mech roller on a 112 lobe sep,ported my miniram picked up about 20 cfm, went to a monoblade, and did some engine coatings.It was a last minute thing, so I didn't have my laptop to make any adjustments. There may be a little bit left in it.
Former Vendor
Joined: Jun 2001
Posts: 7,204
Likes: 6
From: St Marys PA
Re: New dyno numbers. (Vic'89)
What kind of ET's do you pull ?
That's 100 more hp than Corky has and he goes low low 11's.
Vic
That's 100 more hp than Corky has and he goes low low 11's.
Vic
My setup is capable of putting out ~330 Hp reported be other individuals. And some of the best of those setups are running high 11s. The 40 more horses Cork's readout showed is not gonna get him the 11.11 he is definately getting. If you put those times into a Hp calculator with a car weight of 3305 (that is what mine weights with me in it) you get 476 HP. But I could be wrong, its just my thoughts. And I guess my hopes for my 406 :D
PS I have a feeling when Cork and I go to the track this weekend, he gets a 10sec pass!
Guess time will tell.... :cheers:
Great numbers again..... :cheers:
[Modified by ski_dwn_it, 2:58 PM 11/1/2002]
Thread Starter
Melting Slicks
Joined: Mar 2002
Posts: 3,108
Likes: 126
From: S.L.C. UT
Re: New dyno numbers. (ski_dwn_it)
I definitely think Corky is making more power than his dyno numbers say.Dyno's can also vary quite a bit from one dyno to another.My second pull was actually a little bit better, so I changed my numbers to that pull.