C4 Gas Pedal Replacement
Thread Starter
Intermediate
Joined: Apr 2014
Posts: 38
Likes: 0
From: Findlay Ohio
C4 Gas Pedal Replacement
I currently own an 87 C4 that has been converted to a track car. I've noticed that my gas pedal is very flimsy and it seems like the source of the issue is the plastic mount. I've read some older forums on here noting that it's hard to find but some people have been able to get aluminum or stainless steel mounts. Does anyone know where I can get one?
Safety Car
Joined: Aug 2013
Posts: 4,422
Likes: 602
From: Minneapolis Mn
Don't know if this is metal or plastic: https://www.corvettemods.com/C4-Corv...y_p_11243.html
Here's another: https://www.volvette.com/4PE16.html
And another: https://www.ecklerscorvette.com/corv...1984-1996.html
I know at one time someone was making replacement metal pivot assemblies, but unable to find them specifically at the moment.
Here's another: https://www.volvette.com/4PE16.html
And another: https://www.ecklerscorvette.com/corv...1984-1996.html
I know at one time someone was making replacement metal pivot assemblies, but unable to find them specifically at the moment.
Thread Starter
Intermediate
Joined: Apr 2014
Posts: 38
Likes: 0
From: Findlay Ohio
Thank you both for the info. I prefer not to get the stock replacement as linked above, as I would like to purchase a metal aftermarket mount, given the stock ones don't hold up. I tried searching old forums and online, but I have not been able to locate any currently available for purchase. If anyone else knows of where I can find one please let me know.
Drifting
Joined: Apr 2007
Posts: 1,290
Likes: 33
From: Chicago IL
