C4 Tech/Performance L98 Corvette and LT1 Corvette Technical Info, Internal Engine, External Engine

Turn Signal

Thread Tools
 
Search this Thread
 
Old 06-02-2019, 06:35 AM
  #1  
Joe K
Pro

Support Corvetteforum!
Thread Starter
 
Joe K's Avatar
 
Member Since: Jun 2018
Location: Louisville, Ky
Posts: 582
Received 185 Likes on 94 Posts
2022 C4 of the Year Finalist - Unmodified
Finalist 2020 C4 of the Year - Unmodified
C4 of Year Finalist (appearance mods) 2019
Default Turn Signal

85. Right signal flashes all of the outside lamps but no green dash lamp. Dash bulb or ?

TIA

Joe K
Old 06-02-2019, 10:16 PM
  #2  
Kevova
Le Mans Master
 
Kevova's Avatar
 
Member Since: Sep 2013
Location: near the thumb in the mitten
Posts: 6,138
Received 732 Likes on 683 Posts

Default

I would pull cluster to be sure bulb, socket, printed circuit are not burn't.
The following users liked this post:
Joe K (06-05-2019)
Old 06-03-2019, 05:41 AM
  #3  
Joe K
Pro

Support Corvetteforum!
Thread Starter
 
Joe K's Avatar
 
Member Since: Jun 2018
Location: Louisville, Ky
Posts: 582
Received 185 Likes on 94 Posts
2022 C4 of the Year Finalist - Unmodified
Finalist 2020 C4 of the Year - Unmodified
C4 of Year Finalist (appearance mods) 2019
Default

Thanks. Meant to mention that it's an intermittent problem. It's working again. Afaik nothing I do makes it start again. I'll take a look at what you suggested.
The following users liked this post:
GregMartin (06-03-2019)
Old 06-05-2019, 02:11 PM
  #4  
3D-Aircrew
Melting Slicks

Support Corvetteforum!
 
3D-Aircrew's Avatar
 
Member Since: Nov 2007
Location: Gainesville FL
Posts: 2,830
Received 145 Likes on 112 Posts

Default

Removing the dash is an easy but tedious task. You have to remove the plastic cover and tilt the steering wheel all the way down then remove the tilt lever. Once you have removed the screws from the digital dash you can move it enough to remove the 2 electrical connectors. The display only comes out one way if tilted correctly. I would suggest you replace your anti-glare plastic if faded. You could also convert it to white LED's while you have it out.

The following users liked this post:
Joe K (06-05-2019)

Get notified of new replies

To Turn Signal




Quick Reply: Turn Signal



All times are GMT -4. The time now is 05:31 AM.