700 r4 was slipping 1985 Corvette
Thread Starter
Drifting
Joined: Mar 2013
Posts: 1,952
Likes: 239
From: Venice Cali.
700 r4 was slipping 1985 Corvette
I could not find my old thread but my 700 r4 was rebuild and one of the things I noticed was the slight jittering or rumbling when flooring it at around 40 mph.
Felt like slippage. I put a small size tie wrap in between the end of the tv cable and the throttle thus starting cable about 2/16ths forward. so more pressure.
It works great but I cannot fiqure out how to set it with the adjuster. Does anyone have a step by step for our cars, not a carburated car.
I dont want to break the adjuster.I have watched videos on it but only with carb.
THX
Felt like slippage. I put a small size tie wrap in between the end of the tv cable and the throttle thus starting cable about 2/16ths forward. so more pressure.
It works great but I cannot fiqure out how to set it with the adjuster. Does anyone have a step by step for our cars, not a carburated car.
I dont want to break the adjuster.I have watched videos on it but only with carb.
THX
Last edited by xrav22; Oct 6, 2019 at 09:29 AM.
