Fuel Pump / Injectors / Tuning Question
Thread Starter
Intermediate
Joined: Jul 2007
Posts: 45
Likes: 0
From: Stevens Point WI
Fuel Pump / Injectors / Tuning Question
Hey Everyone,
Long time no see! Finally back to doing some more upgrades on my 85 Vette. Right now I'm in the process of upgrading to a 383, existing block has been cleaned and crack checked so reusing it to do this upgrade (currently at the machine shop). Here's what I'm putting into it so far:
Do I need to upgrade the fuel pump? What injectors should I get for this? Assuming I'll need to do a tune on this given all the upgrades, suggestions on what to do there?
Thanks in advance for all of your help!
Long time no see! Finally back to doing some more upgrades on my 85 Vette. Right now I'm in the process of upgrading to a 383, existing block has been cleaned and crack checked so reusing it to do this upgrade (currently at the machine shop). Here's what I'm putting into it so far:
- Scat 9000 Series Crank with 3.75 stroke
- Custom ground hydraulic roller cam
- AFR 1040 Heads
- Converting to hydraulic roller lifters / rockers
- TPIS MiniRAM (1205) intake and fuel rails
- Icon Pistons (18cc 4.030") with 6" rods
- Melling 55HV oil pump with metal shaft
- Misc. gaskets, bearings, etc...
Do I need to upgrade the fuel pump? What injectors should I get for this? Assuming I'll need to do a tune on this given all the upgrades, suggestions on what to do there?
Thanks in advance for all of your help!
Last edited by Vision2279; Jul 13, 2020 at 09:47 AM.
