LT1 spring and lifter assistance
Thread Starter
Intermediate
Joined: Jun 2016
Posts: 40
Likes: 32
From: Houston area
LT1 spring and lifter assistance
Here’s the deal. Going to install a GMPP846 in my 94 6spd . It’s Gots be an in and out job in my driver and it has to be done in a day . So no machining the heads etc . I need a set of springs that’ll work (recommendation’s?) with 1.6 SA rockers and do I need new lifters with or without bars? This job has to work and happen in a day so it’s gotta be right there first time. Thanks for the input.
Le Mans Master
Joined: Sep 2013
Posts: 6,192
Likes: 750
From: near the thumb in the mitten
Hot cam springs and retainers should work. Lifters if not damaged could be reused. It canbe done in one day if you have experience. Balancer canbe an issue if you don't have specific puller.
