NX maximizer
Thread Starter
Melting Slicks
Joined: Sep 2000
Posts: 3,150
Likes: 1
From: Carlsbad, CA CA
NX maximizer
I just got the NX maximizer installed and have yet to try it out. I am going to an 1/8 mile track tomorrow to get it dialed in and was wondering what is a good base program to start with. I was wondering if anyone around here is running one.? If so what kind of programs are you running? I.E. delay, build time, retard, start power, and full power.
[Modified by zelement, 10:59 PM 12/12/2002]
[Modified by zelement, 10:59 PM 12/12/2002]
Thread Starter
Melting Slicks
Joined: Sep 2000
Posts: 3,150
Likes: 1
From: Carlsbad, CA CA
Re: (scorp508)
I just got back from making a run.
The instructions are kinda vague.
This is how I programmed it for right now. no inital delay. start power 30% of 150 shot. build time, 2.5 secs to full power. reset +10%.
This felt good. The power came on smooth but still way too much for street tires. I think this setup will be perfect for ET streets. I guess we'll see tomorrow.
I will let you know scorp.
The instructions are kinda vague.
This is how I programmed it for right now. no inital delay. start power 30% of 150 shot. build time, 2.5 secs to full power. reset +10%.
This felt good. The power came on smooth but still way too much for street tires. I think this setup will be perfect for ET streets. I guess we'll see tomorrow.
I will let you know scorp.
Thread Starter
Melting Slicks
Joined: Sep 2000
Posts: 3,150
Likes: 1
From: Carlsbad, CA CA
Re: (zelement)
Last night went to the high school drag 1/8 mile track (my first time). Met a couple of forum members out there. I think it's safe to say that this is the worst track I have ever been to! No joke, well, I actually it was a joke. This track is in a parking lot with no water box and barely enough room for shut down(almost crashed a couple of times), plus no organization whatsoever, all ran by high school kids.
Couldn't get the car to hook no matter what I did. Without nitrous the best 1/8 et was 8.1 @ 88mph with a 2.1 60ft. with the nitrous and the maximizer set a 20% start and build time of 2.0 secs the 1/8 et was 7.5 @94mph with a 2.0 60ft. I made a total of 4 passes and went home. I will never go back again.
I have to get this maximizer dialed in at a better track.
So did the maximizer work? I don't know. Because without the maximizer last time at carlsbad the car went 7.2 in the 1/8 @ 98mph with a 1.8 60ft. So I don't know, but I think it's the track.
Couldn't get the car to hook no matter what I did. Without nitrous the best 1/8 et was 8.1 @ 88mph with a 2.1 60ft. with the nitrous and the maximizer set a 20% start and build time of 2.0 secs the 1/8 et was 7.5 @94mph with a 2.0 60ft. I made a total of 4 passes and went home. I will never go back again.
I have to get this maximizer dialed in at a better track.
So did the maximizer work? I don't know. Because without the maximizer last time at carlsbad the car went 7.2 in the 1/8 @ 98mph with a 1.8 60ft. So I don't know, but I think it's the track.
