GM WeatherPack & like connectors.
Thread Starter
Race Director
Joined: Jul 2000
Posts: 11,007
Likes: 1
From: Probably in the paint booth....
GM WeatherPack & like connectors.
I need these connectors & a catalog showing the different styles. Does anyone know who produces these for GM ???
Thanks
Neal
Thanks
Neal
Burning Brakes
Joined: Feb 2000
Posts: 824
Likes: 2
From: Camden SC
Re: GM WeatherPack & like connectors. (Arisa)
GM parts has a special catalog for connectors. These are usually made available to dealers. Parts people hate them cause there is no money in connectors and takes a lot of time.
Another good source for Weather Pac 10 connectors is a good NAPA store. They have 1, 2, 3, and 4 wire connectors, the special release tool, and if you have to change the wire connector ends, the special crimping tool.
All tools are very reasonably priced.
Good luck.
dlmeyers 90 coupe zf6 3 speed shocks
Another good source for Weather Pac 10 connectors is a good NAPA store. They have 1, 2, 3, and 4 wire connectors, the special release tool, and if you have to change the wire connector ends, the special crimping tool.
All tools are very reasonably priced.
Good luck.
dlmeyers 90 coupe zf6 3 speed shocks
Drifting
Joined: Mar 2001
Posts: 1,636
Likes: 3
From: Lafayette IN
Re: GM WeatherPack & like connectors. (Arisa)
Neal-For some reason, the company name "Packard" comes to mind. It's been a while, but I think when some people were looking for the ECM connectors, there was quite a hefty minimum buy if bought direct.
BTW, YGM -Matt-
BTW, YGM -Matt-
Burning Brakes
Joined: Feb 2000
Posts: 927
Likes: 0
From: Saginaw TX
Re: GM WeatherPack & like connectors. (Arisa)
I've also had luck finding the connectors and pins at Pep Boys. Saw an article in a magazine (National Dragster) that showed an MSD crimp plier. I have tried to buy one, but they've always been sold out. They have dies for the weatherpack pins and also plug wires.
