options for spindles
Thread Starter
Advanced
Joined: Mar 2002
Posts: 55
Likes: 0
From: Slidell La
options for spindles
Hey guys,
I have broken 2 spindles the last 2 times at the track - (1 hardened, 1 stock) and I'm getting sick of it.
The car in question is a 383 supercharged+nitrous 6spd LT4.
This is all done on Nitto 315's w/ 1.99 and 1.97 60'.
I am dying to get a hold of SpeedDemon's billet spindles but I call every week and they still don't have a set available :(
Do I have any options in the meantime? Its 40 degrees outside and I'm dying to get to the track!
Thanks in advance,
Madhu
I have broken 2 spindles the last 2 times at the track - (1 hardened, 1 stock) and I'm getting sick of it.
The car in question is a 383 supercharged+nitrous 6spd LT4.
This is all done on Nitto 315's w/ 1.99 and 1.97 60'.
I am dying to get a hold of SpeedDemon's billet spindles but I call every week and they still don't have a set available :(
Do I have any options in the meantime? Its 40 degrees outside and I'm dying to get to the track!
Thanks in advance,
Madhu
Melting Slicks
Joined: Mar 2002
Posts: 3,108
Likes: 126
From: S.L.C. UT
Re: options for spindles (madskilz)
Forum member Jeb Burnett started a cryogenic business deepfreezecryo.com and has done our spindles with good results.If his website is still down you can Email him at badvette@prodigy.net
Thread Starter
Advanced
Joined: Mar 2002
Posts: 55
Likes: 0
From: Slidell La
Re: options for spindles (tpi 421 vette)
Thanks for the advice.
How/what does everyone have to launch a 6spd C4?
What is the best 60' for a 6spd LT4 w/ the IRS still in place.
I didn't realize it would be this much trouble to get this car to 60' foot without braking anything.
I am toying w/ putting a 9 inch with ladder bars and coilovers and be done with it but I know I will kill the handling of the car and it might be fun to go to Silver State Classic and try to run in the open class one day. :D
Madhu
How/what does everyone have to launch a 6spd C4?
What is the best 60' for a 6spd LT4 w/ the IRS still in place.
I didn't realize it would be this much trouble to get this car to 60' foot without braking anything.
I am toying w/ putting a 9 inch with ladder bars and coilovers and be done with it but I know I will kill the handling of the car and it might be fun to go to Silver State Classic and try to run in the open class one day. :D
Madhu
