Master cylinder question!!!
Thread Starter
Drifting
Joined: Jun 2001
Posts: 1,625
Likes: 1
From: Zagreb, Croatia
Master cylinder question!!!
I had next problem:
when i tried to start the car and turn the ignition on, i would only get "security" light and the car wouldn't start.
So, after playing for a while i discovered that the problem was in little switch on brakes master cylinder. I disconnected the wire that went to that switch
( little white on pic. ) and connected it to the ground and car started normally.
But now I have brake/parking red light on all of the time.
Did anybody have a problem like that and how did you solve it?
when i tried to start the car and turn the ignition on, i would only get "security" light and the car wouldn't start.
So, after playing for a while i discovered that the problem was in little switch on brakes master cylinder. I disconnected the wire that went to that switch
( little white on pic. ) and connected it to the ground and car started normally.
But now I have brake/parking red light on all of the time.
Did anybody have a problem like that and how did you solve it?
