Blue print engine
Thread Starter
Instructor
Joined: Apr 2015
Posts: 178
Likes: 49
From: West Plains, Missouri
Blue print engine
Do any of you have any experience with Blueprint engines? This is the part number I have in mind.
Thanks for your input, Mike
Blueprint Engines New Block Casting 350 ci Cruiser Crate Engine
Part Number: 138-BP350CTThanks for your input, Mike
Melting Slicks
Joined: Sep 2010
Posts: 2,422
Likes: 202
Google search is not the bible.
However.
You can read other forums and reviews some good some bad.
Like many reviews. You can weed out the BS..
The good. 30m/ 50k warranty.
If someone built alone NO warranty.
Even a machine shop typically NO warranty.
https://blueprintengines.com/pages/warranty
However.
You can read other forums and reviews some good some bad.
Like many reviews. You can weed out the BS..
The good. 30m/ 50k warranty.
If someone built alone NO warranty.
Even a machine shop typically NO warranty.
https://blueprintengines.com/pages/warranty
Drifting
Joined: May 2007
Posts: 1,426
Likes: 165
From: Motor City
I've got a BP 355 LT1 in my 93. Not sure if they make it anymore but was sold through Summit/Jegs a few years ago.
Couple issues with it during installation (knock sensor hole size wrong, cylinder head steam pipe hole stripped), but outside of that it has run great. I'd recommend them.
Couple issues with it during installation (knock sensor hole size wrong, cylinder head steam pipe hole stripped), but outside of that it has run great. I'd recommend them.
