third bake light removal?
Thread Starter
Cruising
Joined: Sep 2021
Posts: 14
Likes: 0
third bake light removal?
Hey,
got a blub out on my third bake light on my 1988 conv. how do you get to it?I 've looked all over youtube no such luck ,service manual has nothing about it either.
Thanks
got a blub out on my third bake light on my 1988 conv. how do you get to it?I 've looked all over youtube no such luck ,service manual has nothing about it either.
Thanks
Melting Slicks
Joined: May 2014
Posts: 2,895
Likes: 592
From: New Port Richey FL
You have to reach in from the top by the gas filler (remove door assembly and bib) to gain access from top also remove license plate to access from the bottom
There are two 10 or 11 mm nuts remove them and the light assembly comes out. If you don't want to pull the assembly there is 2 screws that hold the back cover on that allows access to the bulbs so you have options.
Be careful Not to let the trim piece on bumper cover from hitting the ground it's paint to match
There are two 10 or 11 mm nuts remove them and the light assembly comes out. If you don't want to pull the assembly there is 2 screws that hold the back cover on that allows access to the bulbs so you have options.
Be careful Not to let the trim piece on bumper cover from hitting the ground it's paint to match
Last edited by s carter; Sep 26, 2024 at 07:10 PM.
Team Owner
Joined: Sep 2003
Posts: 25,394
Likes: 2,741
8B-5 in the FSM has text for bulb replacement and there's sort of illustrated figure there also 8B-3 on the previous page.
