What are the differences in fuel tank modules?
Thread Starter
Tech Contributor
Joined: Jun 2004
Posts: 20,775
Likes: 957
From: I tend to be leery of any guy who doesn't own a chainsaw or a handgun.
What are the differences in fuel tank modules?
While trying to find anybody who sells a decent fuel pump for my (highly modified) '84, I see on the well known online auction site a few different (pump and float assembly) modules for different years of C4s. What might be the differences over the years, other than probably the pump capacity? What's the range of interchangeability with these modules?
Thanks for any information and clarifications.
Thanks for any information and clarifications.
Safety Car
Joined: Mar 2017
Posts: 4,157
Likes: 1,292
From: LeClaire Iowa
My opinion is none of the aftermarket float/ mounting assembly's work properly without added work.
calibrate fuel sender float - CorvetteForum - Chevrolet Corvette Forum Discussion
Here is my journey to get mine to read correctly. I will say some have found them to work correctly but not many. Dan
calibrate fuel sender float - CorvetteForum - Chevrolet Corvette Forum Discussion
Here is my journey to get mine to read correctly. I will say some have found them to work correctly but not many. Dan
Team Owner
Joined: Sep 2003
Posts: 25,330
Likes: 2,722
If you have a sender tree that does correct fuel level, I believe you just use the electrical connectors at sender mounting flange and the submersed pump connector and use what you have. There are WeatherPack repair connectors for the top and nearly all pumps can be accommodated on most pump trees. In tank socks and pickups are out there. If you don't have one, I'd probably try to acquire something local OE/GM to use and fabricate. ALL OE/GM should be tagged for ID.
