trans cooler
Thread Starter
Pro
Joined: Oct 2002
Posts: 638
Likes: 0
From: tampa fl
trans cooler
I just had some AN steel braided line made up so i could run a trans cooler. I just disconnected it from the radiator lower and upper....and then ran unions to the AN lines and cut notch in the passenger side radiator shroud and mounted the trans cooler to the A/C condenser. This way i can always go back to stock and i have no hose clamps to worry about, and it bypasses the radiator cooler. Has anyone done this before?? I'm using a farely large cooler. like 10"x11" or something. I just had a bad feeling about the tranny running hot when i take it to the track. the radiator is small enough for the engine...never mind adding a tranny to it.
-Jason 89 Auto Coupe
LOW 13's
-Jason 89 Auto Coupe
LOW 13's
