Please Help?
Thread Starter
Instructor
Joined: Mar 2003
Posts: 176
Likes: 0
From: Holtsville NY
Please Help?
I recently found someone selling very affordable custom wheels but they have no idea what specifications fit my car. I want 18 x9.5 front and 18 x 10.5 rear wheels. Can anyone help with what offset and bolt pattern I should order? Thanks in advance. :withstupid:
Racer
Joined: Sep 2000
Posts: 479
Likes: 0
From: St. Petersburg Florida
CI 6-7-8-9 Veteran
Re: Please Help? (Epyon127)
Not sure about the spacing, but if memory serves me right (and sometimes it doesn't!!) I believe that the offset is approx. 50mm. I think that is the GS offset. I'm sure someone will jump in with the stock number.
:yesnod:
[Modified by 92PoloVette, 7:57 PM 4/15/2003]
:yesnod:
[Modified by 92PoloVette, 7:57 PM 4/15/2003]
Race Director
Joined: Dec 1999
Posts: 11,182
Likes: 2
From: Almost all Skyline Cruises Vettes at Waterside 1-5
Cruise-In I Veteran
Cruise-In II Veteran
Cruise-In III Veteran
Cruise-In IV Veteran
Cruise-In V Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
Re: Please Help? (Epyon127)
:cheers: About eight months ago, we had problems with someone "selling very affordable wheels"
If the seller doesn't know what you need, I would be a little skeptical
There are lots of places that will allow you to become a "dealer". We had someone unfortunately, on the Forum, who became a "dealer", took the money and didn't deliver.
CAVEAT EMPTOR Let the Buyer Beware! Was true in ancient Rome and is still true today!
Deal with knowledgeable people who have a reputation to uphold...it may cost a little more upfront, but you may save big $ in the long run
:steering:
If the seller doesn't know what you need, I would be a little skeptical
There are lots of places that will allow you to become a "dealer". We had someone unfortunately, on the Forum, who became a "dealer", took the money and didn't deliver.
CAVEAT EMPTOR Let the Buyer Beware! Was true in ancient Rome and is still true today!
Deal with knowledgeable people who have a reputation to uphold...it may cost a little more upfront, but you may save big $ in the long run
:steering:
Elite Torch Red Member
Joined: Sep 1999
Posts: 57,805
Likes: 23
From: Exit 89 GSP,Lakewood,NJ The Land Of Mojo
Cental/South NJ Events Coordinator
CI 1-2-3-4-5-6-7-8-9-10-11-12 Vet
CI-II Burnout & Drag Champ
St. Jude Donor '03-'04-'05-'06-'07
Re: Please Help? (Epyon127)
The bolt circle is 4.75
