VSS/ECM relation question
Thread Starter
Burning Brakes
Joined: Dec 2002
Posts: 1,088
Likes: 0
From: Lakeland fl
VSS/ECM relation question
What exactly does my ECM (6870) do with the info from my VSS ? I read that the cluster 1/2's the signal and sends it to the ECM, but what does it use it for? Im trying to ditch my digital cluster and my Camaro replacment doesnt seem to have a VSS output to ECM (if it does I havent found it yet). With WINALDL I verified the ECM gets no signal when the stock cluster is unplugged.
Melting Slicks
Joined: Apr 2001
Posts: 2,105
Likes: 220
From: Ca.
Re: VSS/ECM relation question (SBNova)
This thread may help a bit... http://forums.corvetteforum.com/zero...657287#3657287[/URL]
[Modified by drive it, 1:20 AM 5/16/2003]
[Modified by drive it, 1:25 AM 5/16/2003]
[Modified by drive it, 1:20 AM 5/16/2003]
[Modified by drive it, 1:25 AM 5/16/2003]
Drifting
Joined: Mar 2001
Posts: 1,636
Likes: 3
From: Lafayette IN
Re: VSS/ECM relation question (SBNova)
That's a pretty good link. One point I thought I would throw out in the open is that for my 870-730 swap, I didn't need to change from magnetic/optical or back again. I use the AUJP BIN which is for an F-body.
If you try that method for the 870-730 and it doesn't work out, lemme know.
Good luck, -Matt
If you try that method for the 870-730 and it doesn't work out, lemme know.
Good luck, -Matt
