my first DATAMASTER scans.
Thread Starter
Melting Slicks
Joined: Oct 2000
Posts: 3,010
Likes: 1
From: Sweden/Stockholm
my first DATAMASTER scans.
Hooked up my laptop and made a few runs.
I never reeved abow 3000rpm.
This is my first scan.
Feedback please?
Download it here..
http://stalblom.datakultur.com/webpage/DD.uni
[Modified by devilfish, 2:19 PM 5/20/2003]
I never reeved abow 3000rpm.
This is my first scan.
Feedback please?
Download it here..
http://stalblom.datakultur.com/webpage/DD.uni
[Modified by devilfish, 2:19 PM 5/20/2003]
Team Owner
Joined: Apr 2001
Posts: 22,267
Likes: 3
From: Dallas TX
Re: my first DATAMASTER scans. (devilfish)
Hooked up my laptop and made a few runs.
I never reeved abow 3000rpm.
This is my first scan.
Feedback please?
Download it here..
http://stalblom.datakultur.com/webpage/DD.uni
[Modified by devilfish, 2:19 PM 5/20/2003]
I never reeved abow 3000rpm.
This is my first scan.
Feedback please?
Download it here..
http://stalblom.datakultur.com/webpage/DD.uni
[Modified by devilfish, 2:19 PM 5/20/2003]
Safety Car
Joined: May 1999
Posts: 3,651
Likes: 5
From: Atlantis
Cruise-In I Veteran
Re: my first DATAMASTER scans. (devilfish)
Hey guys,
Can I email you a DataMaster file for analysis?
Just made this one tonight and would like someone familiar with DM to check it out.
Can I email you a DataMaster file for analysis?
Just made this one tonight and would like someone familiar with DM to check it out.
Safety Car
Joined: May 1999
Posts: 3,651
Likes: 5
From: Atlantis
Cruise-In I Veteran
Re: my first DATAMASTER scans. (devilfish)
devilfish,
I dnloaded your file. It took awhile before it went closed loop. I don't know, that may be perfectly normal. Your engine was already warmed up before you started logging but it took three minutes to go to closed loop.
There's a lot of knock counts too.
I'm sure there are a lot of other folks that can anlayze this data much better than me. I'm just learning.
I'd like somebody to take a look at my DM log file.
I dnloaded your file. It took awhile before it went closed loop. I don't know, that may be perfectly normal. Your engine was already warmed up before you started logging but it took three minutes to go to closed loop.
There's a lot of knock counts too.
I'm sure there are a lot of other folks that can anlayze this data much better than me. I'm just learning.
I'd like somebody to take a look at my DM log file.
Safety Car
Joined: May 1999
Posts: 3,651
Likes: 5
From: Atlantis
Cruise-In I Veteran
Re: my first DATAMASTER scans. (devilfish)
Hmmm.
What am I seeing on the devilfish file... it's getting knock retard on LOW power/map settings..... that seems backwards.....
Or am I looking at it all wrong?
What am I seeing on the devilfish file... it's getting knock retard on LOW power/map settings..... that seems backwards.....
Or am I looking at it all wrong?
Drifting
Joined: Feb 2002
Posts: 1,937
Likes: 2
From: Arvada CO
Re: my first DATAMASTER scans. (devilfish)
what version do you use?
I sue the one for 90-91 Y-Body 5.7L PFI (L98).
What whas waaaay off ?
hehe
I sue the one for 90-91 Y-Body 5.7L PFI (L98).
What whas waaaay off ?
hehe
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Safety Car
Joined: May 1999
Posts: 3,651
Likes: 5
From: Atlantis
Cruise-In I Veteran
Re: my first DATAMASTER scans. (krivera)
DataMaster WITH the cable was $195 from AKM.
Andrew is the man there.
They have GREAT customer service, BTW.
Good folks to deal with, I've been very happy with the software and the hardware.
Andrew is the man there.
They have GREAT customer service, BTW.
Good folks to deal with, I've been very happy with the software and the hardware.
Safety Car
Joined: May 1999
Posts: 3,651
Likes: 5
From: Atlantis
Cruise-In I Veteran
Re: my first DATAMASTER scans. (devilfish)
I got alot of knocks when coasting at a constant rpm...
I NOTICED that.
The only thing I could figure was you may have a lifter tapping or something making noise that the KS is picking up as knock.
That could cause those knock counts I say at low power settings.
Mine is just opposite. I am getting a little 4-6 degrees at WOT.
I do have my base timing bumped up to +8 degrees right now.
I'm running 93 octane...that's all the 'tane I can get.
Thread Starter
Melting Slicks
Joined: Oct 2000
Posts: 3,010
Likes: 1
From: Sweden/Stockholm
Re: my first DATAMASTER scans. (VetNutJim)
here is my latest scaning. Not so muck knock this time.. ITs a long scan.
http://vetteforum.org/webpage/jobb.uni
http://vetteforum.org/webpage/jobb.uni