convertible cross brace
Thread Starter
Racer
Joined: Dec 2002
Posts: 498
Likes: 0
From: Utica NY
convertible cross brace
Hey guys, I have a line on a crossbrace for cheap and had a couple questions, I have an early 86, does it have the holes already for the front? and how difficult is it to adapt to the rear, I know R&D has a really nice setup, but this would be cheaper, and also would give a factory appearance, which I really like. any feedback would be appreciated
John
John
Safety Car
Joined: Jan 2001
Posts: 4,386
Likes: 689
From: Boise ID
Re: convertible cross brace (johnno!)
At the rear mounts of the brace the are also 2 spacers on each side, about 1 1/4" thick which mount between the brace and frame. Try to get those with along with the brace...
Thread Starter
Racer
Joined: Dec 2002
Posts: 498
Likes: 0
From: Utica NY
Re: convertible cross brace (87SAM)
thanks for the info, I believe I've read that the front holes are pre drilled, can someone confirm that, and also if the middle connects, are the holes there for that?
