Help! Ppl with 1990 C4 in the Allentown area
06-17-2003, 09:22 AM
#1
8th Gear
Thread Starter
Member Since: Mar 2003
Location: Bethlehem PA
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Help! Ppl with 1990 C4 in Eastern PA
I work for Brey-Krause manufacturing in Allentown, PA. We have encountered a problem with our C4 racing harness bar, which is supposed to fit 1990 and later models. Apparently cars built early in 1990 have different dimensions at the point the bar mounts to the car than those built from late 1990 on, which is causing fit problems. We would like to bring in an early model 1990 car to inspect it.
The way to distinguish them is that early 1990 models have clothes hangers on the B-pillar of the car, while the late 1990 cars do not. If you own an early 1990 C4, we could really use your help! We would like to confirm that our part does not fit, and determine if it can me modified. Your help would be very much appreciated!
Info on the part can be seen here: http://www.bkauto.com/corvette/r1110.php
www.bkauto.com
[Modified by Angry Joe, 2:25 PM 6/17/2003]
The way to distinguish them is that early 1990 models have clothes hangers on the B-pillar of the car, while the late 1990 cars do not. If you own an early 1990 C4, we could really use your help! We would like to confirm that our part does not fit, and determine if it can me modified. Your help would be very much appreciated!
Info on the part can be seen here: http://www.bkauto.com/corvette/r1110.php
www.bkauto.com
[Modified by Angry Joe, 2:25 PM 6/17/2003]
