Any ideas on HP?
Thread Starter
Racer
Joined: Apr 2003
Posts: 371
Likes: 0
From: Kingsport TN
Any ideas on HP?
Purchased 89 project car of SSBC, has 2.02 Bowtie aluminum heads, Lingenfelter intake and runners, HEI system, 1 5/8 long tube headers, 10.25 comperssion ratio, 58mm throttle body w/air foil, power chip, ported and polished. 6 speed with 3.31 rear axel. Think I can get into the low13's? Thanks for the input in advance. :flag :steering:
Safety Car
Joined: Feb 1999
Posts: 4,724
Likes: 16
From: Little Elm TX
Re: Any ideas on HP? (justatoy)
Dependent on which Lingenfelter runners, you can get into the low 12's.... if they're long tube runners, you probably can make right up to around 375 HP dependent on the other little things done.... over 400 hp is possible if they are the Superram runners.
good luck
Beach Bum
good luck
Beach Bum
