porting a throttle body
Le Mans Master
Joined: Dec 1999
Posts: 8,540
Likes: 1
From: And on the fifth day, subpoenas were served to Obama senior staff
Re: porting a throttle body (mdm)
Unless your "bolt-ons" require more air then the GM 577 ci crate engine, I would not waste alot on time on the TB!
Pete
Pete
Thread Starter
Instructor
Joined: Feb 2002
Posts: 183
Likes: 0
From: nthridgeville ohio
Re: porting a throttle body (PeteL)
The guy thats building my 383 said that I should run a 52 mm tb. Im shooting for 400-425 hsp with around460 torque. Ive got everything else --super ram--forced air---headers and straight pipes back to my flowmasters
Melting Slicks
Joined: Jul 1999
Posts: 2,875
Likes: 0
From: Olive Branch (Memphis suburb) MS
Cruise-In II Veteran
Re: porting a throttle body (mdm)
Notice the roller bearings on the shaft. David Koldos did mine. Check this post http://forums.corvetteforum.com/zero...761#1543882761 :steering:
Melting Slicks
Joined: Jul 1999
Posts: 2,875
Likes: 0
From: Olive Branch (Memphis suburb) MS
Cruise-In II Veteran
Burning Brakes
Joined: Feb 2001
Posts: 1,223
Likes: 0
From: Nashville Tennessee
Re: porting a throttle body (Ramrod92)
David Koldos did mine. Check this post http://forums.corvetteforum.com/zero...761#1543882761 :steering:
