Trying to tune with a scanner
Thread Starter
Instructor
Joined: Mar 2003
Posts: 239
Likes: 0
From: Toronto Ontario
Trying to tune with a scanner
Ive been trying to tune my 91 l98 with a snap on scanner.
I have a stage 6 chip fro TPIS but I Im trying to look for improvements
with some minor tuning.I have given some fuel pressure to acheive
800mV at WOT 44 PSI vacuume on to be exact dose this seem high.
I have also noticed that the more fuel I give the more bottom end I lose
so I have been setting back my TPS voltage to gain it back is this alright to do?
I have a stage 6 chip fro TPIS but I Im trying to look for improvements
with some minor tuning.I have given some fuel pressure to acheive
800mV at WOT 44 PSI vacuume on to be exact dose this seem high.
I have also noticed that the more fuel I give the more bottom end I lose
so I have been setting back my TPS voltage to gain it back is this alright to do?
