rear window defroster wire attach
Thread Starter
Pro
Joined: Sep 2003
Posts: 670
Likes: 1
From: charlotte nc
rear window defroster wire attach
I remember seeing a thread on how to repair a broken wire to the rear window defroster . Seems like there was an conductive adhesive that is made to reattach the power wire in lieu of soldering. I tried searching the archives but could not find it. Can anyone point me in the right direction as to if such an adhesive exists and where to find it. Thanks
Melting Slicks
Joined: Apr 2000
Posts: 3,198
Likes: 2
From: Northern CA
Re: rear window defroster wire attach (dwestsr)
Here's one thread, I think there may be others. HTH
http://forums.corvetteforum.com/zerothread?id=266852
http://forums.corvetteforum.com/zerothread?id=266852
Team Owner
Joined: Dec 2000
Posts: 90,675
Likes: 304
From: SE NY
Cruise-In II Veteran
Re: rear window defroster wire attach (dwestsr)
And I've successfully use JB Weld between the conductive attachment points for some additional insurance.
Use a wipe with carb cleaner or laquer thinner to clean the glass before applying adhesive.
Use a wipe with carb cleaner or laquer thinner to clean the glass before applying adhesive.
