No starting problem
Thread Starter
Racer
Joined: Aug 2001
Posts: 488
Likes: 0
From: Rockwall TX
No starting problem
I bypassed my vats with a resistor and now I get a clicking noise from the starter. So, good i know i have to replace my ignition lock cylinder. Bad, I dont know why the starter wont turn over?
Pro
Joined: Sep 2003
Posts: 670
Likes: 1
From: charlotte nc
Re: No starting problem (Kehrer923)
I know this may sound crazy, but whack the starter with a hammer while someone else turns the key . Sometime you can jar the solenoid and get one more start out of it. If it starts, the solenoid is the problem. :cheers:
