Transmission Questions
Thread Starter
1st Gear
Joined: Jan 2004
Posts: 1
Likes: 0
From: Peachtree City GA
Transmission Questions
I am the 1 putting Roberts (Hi-PSI) 1995 vette back together. This is what happended. When the transmission was in and the car was in N the back tires would spin...If you put the car into gear and press the clutch in the tires would NOT turn. So we pulled out the trasmission and it still wouldnt turn, So we pulled off the bell housing and POW it turns. I belive that the bolts in the bell housing are wrong but does anyone have any clue as to what size bolt we need? Or could it be a bad cluct bolt or is it the bell housing bolts? What I am looking for is a good picture to show me Exactualy how it goes back in:confused: so I can get this car out of my HAIR:banghead: . Any help would be great.
thanks
matt :confused: :banghead:
[Modified by lillbush, 10:10 PM 1/2/2004]
[Modified by lillbush, 10:10 PM 1/2/2004]
thanks
matt :confused: :banghead:
[Modified by lillbush, 10:10 PM 1/2/2004]
[Modified by lillbush, 10:10 PM 1/2/2004]
