Duct work for supercharger
Thread Starter
Drifting
Joined: Dec 2003
Posts: 1,564
Likes: 28
From: Medina OH
Duct work for supercharger
Has anyone ever ran a 90 off the supercharger to get air from the driverside wheel well?
I was also considering running duct work up to and through the cowl (to the left of the brake booster) to get some cool air. Any suggestions????
I was also considering running duct work up to and through the cowl (to the left of the brake booster) to get some cool air. Any suggestions????
Advanced
Joined: Apr 2002
Posts: 51
Likes: 0
From: Amarillo TX
Re: Duct work for supercharger (85 Stalker)
I cut out a section of my inner and put in an offset K&N to pull some cooler air in from the wheelwell. i don't know if it was the cleaner air (probably) or the better inlet but I went from 8.6 to 11.1 pounds of boost with it. Honestly I think it was from the old nasty stock ATI/K&N cone air cleaner being a restriction..
[Modified by Justme, 9:28 AM 1/24/2004]
[Modified by Justme, 9:28 AM 1/24/2004]
Thread Starter
Drifting
Joined: Dec 2003
Posts: 1,564
Likes: 28
From: Medina OH
Re: Duct work for supercharger (Justme)
I'm so glad to hear that! Could you possibly email or post a photo? My stroker gives off so much heat that without the intercooler, I would fear predet.... One thing I was also thinking about was fabbing a carbon fiber heat shield and place it between the engine and the supercharger.
My email is car0630@worldnet.att.net
Thanks again!
My email is car0630@worldnet.att.net
Thanks again!
