DRM IS NOW A SUPPORTING VENDOR!!!
Thread Starter
Former Vendor
Joined: Feb 2004
Posts: 9,615
Likes: 13
From: Burlington NC
DRM IS NOW A SUPPORTING VENDOR!!!
First of all I would like to thank Troy Roberts for making this possible. Our goal on the forum is to answer questions and sell parts. We are going to do our best to help people in the Corvette community like we have done for so many years. We are going to be very active on the Roadrace and Auto-x forum because that's what we all love. From time to time we will be active on the other forums as well. Our other goal of selling parts, will take sometime but running specials and getting more advertising on the forum can't hurt. Here is some contact infomation for everyone who doesn't have it already. Thanks for having us on board!!!!!!!!!!
Doug Rippie Motorsports
5767 Highway 55 SE
Buffalo, MN 55313
(763)477-9272
Doug Rippie Motorsports
5767 Highway 55 SE
Buffalo, MN 55313
(763)477-9272
Drifting
Joined: May 2003
Posts: 1,979
Likes: 48
From: Lakeport CA
Re: DRM IS NOW A SUPPORTING VENDOR!!! (Strick)
DOAH!!! After all the $ I've spend with DRM... now they might offer discounts?? Oh well, can't say I havent' been satisfied with all the parts.
Although... I did want to talk to them about the debri left inside my chassis bar. On hard turns I can hear junk rolling back & forth from side to side inside the horizontal bar. Pretty annoying... :(
By the way, the web site is:
www.dougrippie.com
You can probably guess why I have that one memorized... :rolleyes:
[Modified by Trog, 5:13 PM 2/19/2004]
Although... I did want to talk to them about the debri left inside my chassis bar. On hard turns I can hear junk rolling back & forth from side to side inside the horizontal bar. Pretty annoying... :(
By the way, the web site is:
www.dougrippie.com
You can probably guess why I have that one memorized... :rolleyes:
[Modified by Trog, 5:13 PM 2/19/2004]
Elite Torch Red Member
Joined: Sep 1999
Posts: 57,805
Likes: 23
From: Exit 89 GSP,Lakewood,NJ The Land Of Mojo
Cental/South NJ Events Coordinator
CI 1-2-3-4-5-6-7-8-9-10-11-12 Vet
CI-II Burnout & Drag Champ
St. Jude Donor '03-'04-'05-'06-'07
Re: DRM IS NOW A SUPPORTING VENDOR!!! (Randy@DRM)
Excellent, 75% off our first order correct? (Hey it was worth a shot!!)
Welcome aboard. :cheers:
Welcome aboard. :cheers:
Team Owner
Joined: Sep 2001
Posts: 62,160
Likes: 1,733
From: Athens AL
C7 of the Year - Unmodified Finalist 2021
C4 of Year Finalist (performance mods) 2019
Re: DRM IS NOW A SUPPORTING VENDOR!!! (Mr Mojo)
You wanna sell parts, give us $$$ off for being members. :D
Thread Starter
Former Vendor
Joined: Feb 2004
Posts: 9,615
Likes: 13
From: Burlington NC
Re: DRM IS NOW A SUPPORTING VENDOR!!! (vader86)
I'm glad to be here on the Forum. I would love to give out parts but I can't. I'm sure you guys and girls can understand that. I have been thinking of different ways of helping the community out. I'll keep everyone posted.
Thanks
Randy Rippie
Thanks
Randy Rippie
Drifting
Joined: May 2003
Posts: 1,979
Likes: 48
From: Lakeport CA
Re: DRM IS NOW A SUPPORTING VENDOR!!! (Randy@DRM)
So Randy about my chassis bar... any ideas on what I can do? You might want to mention it to your fabricators to shake the metal shavings out of the tubes before welding them up.
I was thinking about drilling a small hole on the bottom side towards each end & spraying some expanding foam inside. Then quickly take a spin around the block (both directions) to get the debri to stick in the foam.
With it right there behind your head it makes quite a bit of noise rolling around inside.
I was thinking about drilling a small hole on the bottom side towards each end & spraying some expanding foam inside. Then quickly take a spin around the block (both directions) to get the debri to stick in the foam.
With it right there behind your head it makes quite a bit of noise rolling around inside.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Former Vendor
Joined: Feb 2004
Posts: 9,615
Likes: 13
From: Burlington NC
Re: DRM IS NOW A SUPPORTING VENDOR!!! (Trog)
DO NOT drill a hole in the bar at all. It can weaken the bar. I will talk with the guys in the shop about it in the AM.
Thanks
Randy
Thanks
Randy
Pro
Joined: Apr 2002
Posts: 605
Likes: 0
From: Outer Banks NC FIRST IN FLIGHT
Re: DRM IS NOW A SUPPORTING VENDOR!!! (Randy@DRM)
I'm glad to be here on the Forum. I would love to give out parts but I can't. I'm sure you guys and girls can understand that. I have been thinking of different ways of helping the community out. I'll keep everyone posted.
Thanks
Randy Rippie
Thanks
Randy Rippie
You can sell one at regular price or ten at a discounted price, and still earn a ton of profit. The choice is yours.
[Modified by Kizmo, 12:19 AM 2/20/2004]
Thread Starter
Former Vendor
Joined: Feb 2004
Posts: 9,615
Likes: 13
From: Burlington NC
Re: DRM IS NOW A SUPPORTING VENDOR!!! (Kizmo)
I agree with your business ideas. I have always tried to make this sport more affordable, by being fair and building good parts.
Thank you and I look forward to helping everyone out,
Randy
Thank you and I look forward to helping everyone out,
Randy
Pro
Joined: Apr 2002
Posts: 605
Likes: 0
From: Outer Banks NC FIRST IN FLIGHT
Re: DRM IS NOW A SUPPORTING VENDOR!!! (Randy@DRM)
Thanks for your reply. I look forward to doing business with you in the future.
Also Randy welcome to the club. You found a great group of people here.
Also Randy welcome to the club. You found a great group of people here.
Race Director
Joined: Feb 2004
Posts: 12,518
Likes: 19
Re: DRM IS NOW A SUPPORTING VENDOR!!! (neverendingproject)
Welcome! I have many DRM products on my car. DRM is the only company that I have bought parts from that were better than expected every time. I also like the fact that Pete @ DRM has offered to make certain parts that were not yet developed. :party: :thumbs: :thumbs:
Drifting
Joined: Feb 2003
Posts: 1,292
Likes: 0
From: Beavercreek OR
Re: DRM IS NOW A SUPPORTING VENDOR!!! (Randy@DRM)
I think a lot of supporting vendors offer a discount to members, then run specials. I've been procrastinating on buying a bias spring and the early C4 adapters for the J-55 brakes. As you know the later is offered by another company which shall remain un named here. I could be "convincedand swayed" to stop procrastinating with some coaxing :lol: :smash:
Welcome to the forum. I'm sure you know of the power of some of the group discount special purchases that have gone on here. LOTS of merchandise can move very quickly.
Welcome to the forum. I'm sure you know of the power of some of the group discount special purchases that have gone on here. LOTS of merchandise can move very quickly.
Le Mans Master
Joined: May 2003
Posts: 5,362
Likes: 3
From: Delray Beach FL
Re: DRM IS NOW A SUPPORTING VENDOR!!! (edsalinas)
Welcome to the Forum!
:cheers:
Now I am glad I held off on getting some parts from DRM. I still have some rear suspension parts to purchase. Looking forward to seeing how DRM helps out the Forum community. :cool:
:cheers:
Now I am glad I held off on getting some parts from DRM. I still have some rear suspension parts to purchase. Looking forward to seeing how DRM helps out the Forum community. :cool:
Team Owner
Joined: Sep 2003
Posts: 25,295
Likes: 4
From: I'm the walkin dude I can see all of the world...
St. Jude Donor '03
Re: DRM IS NOW A SUPPORTING VENDOR!!! (neverendingproject)
just looked thru your website :eek: i'll take one of everything!!!