Anybody using Accel Gen. 6 ECM
Thread Starter
Drifting
Joined: Dec 2001
Posts: 1,313
Likes: 1
From: providence ut
Anybody using Accel Gen. 6 ECM
Just bought a accel gen 6 on ebay........I need CalMap programing and some one using calmap with a supercharger's programing for a starting point.I have no idea what this came out of.........I can use any imput.... I don't have a clue, other than I can't do a any real tunning with the stock 85 ECM..........I just down loaded the user's manuel for calmap.
10 lb boost
lingenfelter ported big valve OME heads
super ram/accel intake
224/230...536/544 comp cam
Headers
10 lb boost
lingenfelter ported big valve OME heads
super ram/accel intake
224/230...536/544 comp cam
Headers
Drifting
Joined: Jan 2001
Posts: 1,669
Likes: 1
Re: Anybody using Accel Gen. 6 ECM (lead foot 85 vet)
Yea I have an 86 running a Vortech S trim and DFI. My program is not perfect yet as I have only done on road tuning. My system is running inductive pickup but I do not think it makes a difference in the programming. I think it will convert everything just fine. I will copy it this weekend if you need me to. My setup is actually really close to yours, I am running big port Canfield heads and a Super Ram. My cam is the 220 Lingenfelter though.
Justin
[Modified by snaketr, 7:14 PM 3/11/2004]
Justin
[Modified by snaketr, 7:14 PM 3/11/2004]
Thread Starter
Drifting
Joined: Dec 2001
Posts: 1,313
Likes: 1
From: providence ut
Re: Anybody using Accel Gen. 6 ECM (snaketr)
thanks justin............I should get the accel ecm today and am looking for a interface cable to plug into my laptop, I did have a forum member send me the calmap program.
