Hub needed...anyone have one?
Thread Starter
Burning Brakes
Joined: Dec 2003
Posts: 770
Likes: 0
From: Madison Mississippi
Hub needed...anyone have one?
After ing on the hub and trying unsucessfully to install it, I decided to remove it and investigate the problem. I discovered the hub was damaged on the puller face and had several indentions from the install bolt. Basically, it was screwed up. Good news though, I removed it and discovered the problem before the car ran. Oh well, I need a new hub and I looked on e-bay. Anyone who has one or know where to locate one without sacrificing my first born please advise, Thanks for the suggestions in advance. :skep:
[Modified by RUBYREDVETTECARD, 6:55 PM 3/6/2004]
[Modified by RUBYREDVETTECARD, 6:55 PM 3/6/2004]
Race Director
Joined: Sep 2000
Posts: 17,298
Likes: 33
From: The Top of Utah
Re: Hub needed...anyone have one? (RUBYREDVETTECARD)
Now that you've moved us from the wheel to the engine, would you care to give a clue as to the year??? :rolleyes: :rolleyes: :rolleyes:
RACE ON!!!
RACE ON!!!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski