LT1 Intake Runner Dimentions??
Thread Starter
Melting Slicks
Joined: Jan 2002
Posts: 3,293
Likes: 79
From: Jackson MI
LT1 Intake Runner Dimentions??
Does anyone have the size of the intake runners for the LT1 manifold. I'm looking for Width of port, Height of port, and Total Length. Thanks guys :cheers:
Large Impressive Member
Joined: Jul 2003
Posts: 65,811
Likes: 71
From: Good health is merely the slowest possible rate at which one can die
St. Jude Donor '04-'05-'06-'07
Re: LT1 Intake Runner Dimentions?? (mn_vette)
Width is 1.058" at the top, 1.158" at the bottom and 2.050" tall. I do not have a number on the length. These dimensions are where the manifold meets the head.
Burning Brakes
Joined: Jan 2004
Posts: 933
Likes: 0
From: Inland Empire CA
Re: LT1 Intake Runner Dimentions?? (Corvette Kid NC)
I just measured a spare LT1 Intake I have around, and the runners are roughly 2 7/8" inches. from the head to the valve you're probably looking at another 3-4 inches and that's it. :cheers:
Thread Starter
Melting Slicks
Joined: Jan 2002
Posts: 3,293
Likes: 79
From: Jackson MI
Re: LT1 Intake Runner Dimentions?? (WickedC4)
Sweet! Thanks guys, my memory serves me terribly in situations like this and I didn't really want to pull the manifold to find out. :cheers:
