Normal clutch wear?
Thread Starter
Burning Brakes
Joined: Apr 2001
Posts: 994
Likes: 0
From: Jamison PA
Normal clutch wear?
After pulling my clutch, pressure plate and flywheel I started checking the wear on the clutch. The clutch is worn on the outer edges @ .080 more than the inside edge. It also appears that the throwout bearing was pressing against the clutch hub. These were all GM parts. Has anyone ever come across this? :skep: BTW, the clutch and pressure plate had only 4000 miles on them.
[Modified by Tony.96LT4, 9:53 PM 4/13/2004]
[Modified by Tony.96LT4, 9:53 PM 4/13/2004]
Instructor
Joined: Mar 2003
Posts: 118
Likes: 0
From: Shrewsbury MA
Re: Normal clutch wear? (Tony.96LT4)
Just finished the clutch on a 94 with 72K and I saw the same thing. I assumed this was normal. Had next to no wear on the dual mass flywheel. Skuffed it up and reinstalled. Appears to be good as new.
