Correct Felpro intake gasket # ?
Thread Starter
Melting Slicks
Joined: Jan 2003
Posts: 2,167
Likes: 0
From: What did the 5 fingers say to the face? SLAP!!
Correct Felpro intake gasket # ?
I'm doing an intake swap soon, and I need to know the correct Felpro gasket to use. I have an '86 with cast iron heads. The heads have been ported, however. Do I need to now go from a 1205 to a 1206? Thanks.
Race Director
Joined: Sep 2000
Posts: 17,298
Likes: 33
From: The Top of Utah
Re: Correct Felpro intake gasket # ? (flyersfan1088)
You WISH ! Actually it depends on how large the ports were made. Only you can answer that. If you matched them to the stock gasket, than a stock gasket will be fine.
RACE ON!!!
RACE ON!!!
Thread Starter
Melting Slicks
Joined: Jan 2003
Posts: 2,167
Likes: 0
From: What did the 5 fingers say to the face? SLAP!!
Re: Correct Felpro intake gasket # ? (CFI-EFI)
You WISH ! Actually it depends on how large the ports were made. Only you can answer that. If you matched them to the stock gasket, than a stock gasket will be fine.
RACE ON!!!
RACE ON!!!
Le Mans Master
Joined: Aug 1999
Posts: 7,339
Likes: 137
From: WilkesBarre PA
Re: Correct Felpro intake gasket # ? (flyersfan1088)
Check with a local machine shop. Our shop has a stack of them for all sizes they port the heads to. Match up your ports to one of them, the part# is on the gasket. Also some parts places have a sample pack that is used the same way to match up sizes.
