Rear spring perch question
Thread Starter
Large Impressive Member
Joined: Jul 2003
Posts: 65,811
Likes: 71
From: Good health is merely the slowest possible rate at which one can die
St. Jude Donor '04-'05-'06-'07
Rear spring perch question
I've been adding Energy Suspension poly bushing to the rear of my car and they don't don't offer the perch cushions in poly. I haven't checked with any other company to see if it's available but I was wondering if it was because it might be a bad idea due to the fiberglass construction of the spring and if that's why they don't sell it. I have polys on the spring ends and trailing arms so far and on the D44 batwing that will soon be going in. Sway bar and control arm bushings are still on order.
Race Director
Joined: Feb 2003
Posts: 11,672
Likes: 20
From: Lake Wylie SC
Originally Posted by Corvette Kid NC
I've been adding Energy Suspension poly bushing to the rear of my car and they don't don't offer the perch cushions in poly. I haven't checked with any other company to see if it's available but I was wondering if it was because it might be a bad idea due to the fiberglass construction of the spring and if that's why they don't sell it. I have polys on the spring ends and trailing arms so far and on the D44 batwing that will soon be going in. Sway bar and control arm bushings are still on order.
You'll have to give me a ride when you're done. I'm thinking of this myself. BTW, there might be an auto cross in Spartanburg this Dec.
Thread Starter
Large Impressive Member
Joined: Jul 2003
Posts: 65,811
Likes: 71
From: Good health is merely the slowest possible rate at which one can die
St. Jude Donor '04-'05-'06-'07
Originally Posted by purplemajesty
Which are the perch cushions?
Le Mans Master
Joined: Apr 2002
Posts: 5,727
Likes: 46
From: Waukesha WI
St. Jude Donor '15
When I did the poly stuff on my 90 there were no rubber pieces back there. Only the metal brackets and metal spacers.
Maybe I am not remembering things right but the spring to diff mounting has no rubber parts.
Maybe I am not remembering things right but the spring to diff mounting has no rubber parts.
Thread Starter
Large Impressive Member
Joined: Jul 2003
Posts: 65,811
Likes: 71
From: Good health is merely the slowest possible rate at which one can die
St. Jude Donor '04-'05-'06-'07
Originally Posted by vsocks
There are rubber cushions on at least my 84. I have never seen any poly parts like these either. I am not sure that poly would gain anything here though.
There were on the '85 I took my D44 out of too. You're probably right, I think I'll just replace the rubber if it doesn't look 100% when I pull the 36 out of my '95 to install the 44.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
