Code 26 and 28
Le Mans Master
Joined: Dec 1999
Posts: 8,540
Likes: 1
From: And on the fifth day, subpoenas were served to Obama senior staff
Can't help alot, but quad drivers are inside the ECM. May or may not be an ecm fault, other things can make the ecm "think" the quad drivers have gone TU.
Know that's not much help, but at least it puts the post ttt. Got to be someone that knows those codes on an LT-1.
Good Luck,
Pete
Know that's not much help, but at least it puts the post ttt. Got to be someone that knows those codes on an LT-1.
Good Luck,
Pete
Pro
Joined: Jun 2001
Posts: 696
Likes: 260
From: Stavanger- Norway
Code 26 ECM detected the wrong potential voltage at the #1 quad-driver module circuit for 20 seconds
Code 28 ECM detected the wrong potential voltage at the #3 quad-driver module circuit for 3 seconds.
http://www.batauto.com/articles/egr.html
[This message has been edited by stavanger (edited 07-24-2001).]
Code 28 ECM detected the wrong potential voltage at the #3 quad-driver module circuit for 3 seconds.
http://www.batauto.com/articles/egr.html
[This message has been edited by stavanger (edited 07-24-2001).]
